Sterilizer
Validation
& Monitoring Specialists Ltd

SVMS Ltd
Unit C2, Flightway
Dunkeswell Business Park Dunkeswell, Honiton, Devon EX14 4PG UK

Tel +44 (0) 1404-891838
Fax +44 (0) 1404 891071


GB 9964

SVMS products
SVMS Log Books:
for complete
and accurate
record keeping

 

 

 

SVMS Steam Quality
Superheat Test Kit


For this test, the temperature of steam passing through an orifice in a pitot tube to atmosphere is measured.

The temperature is measured by a thermo-couple placed at the centre of an expansion tube placed over the pitot tube. The temperature is considered to be acceptable if it is less than 25o C above that of the local temperature of boiling water.

The test is intended to demonstrate that the amount of moisture in the steam supply is sufficient to prevent the steam from being superheated as it enters the expanded space of a sterilizer chamber.

• Dryness value
• Non-Condensable Gases
• Clean steam
• Back to SVMS Steam Quality Test Kits

Order


 

 

 

 


 

 

 

Items are as described by EN 285 and include:

  • Pitot tubes (0.4mm, 0.6mm, 0.8mm & 1.0mm)
  • Expansion tube permanently fitted with silicone foam rubber insulation
  • Dual input digital thermocouple indicator, probes and pressure gland